# ROS2 Driver for Blueprint Subsea Oculus M3000d

**URL:** <https://discourse.openrobotics.org/t/ros2-driver-for-blueprint-subsea-oculus-m3000d/59261>\
**Category:** Marine Robotics\
**Created:** [October 27, 2026, 11:23pm UTC](https://discourse.openrobotics.org/t/ros2-driver-for-blueprint-subsea-oculus-m3000d/59261 "2026-10-27T23:23:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![AlePuglisi](https://sea2.discourse-cdn.com/flex022/user_avatar/discourse.openrobotics.org/alepuglisi/32/31915_2.png) [@AlePuglisi](https://discourse.openrobotics.org/u/AlePuglisi)\
**Post date:** [October 27, 2026, 11:23pm UTC](https://discourse.openrobotics.org/t/ros2-driver-for-blueprint-subsea-oculus-m3000d/59261/1 "2026-10-27T23:23:36Z")

</div>

Hi everyone!

I recently open-sourced the ROS2 driver that I’m using for my M3000d. You can find it here:

> **[GitHub - AlePuglisi/oculus-m3000d-ros2-cpp-driver: Driver for the Blueprint Subsea Oculus M3000d...](https://github.com/AlePuglisi/oculus-m3000d-ros2-cpp-driver)**
>
> Driver for the Blueprint Subsea Oculus M3000d Imaging Sonar. ROS2 Jazzy interface and Low Level C++ Sensor Driver.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/ros/original/3X/d/4/d4f949a2f08516385dc554a84d86235d3a63f2d9.png)

I worked on this last year by extending ENSTA Bretagne’s oculus\_ros2, which didn’t include support for the M3000d.  
I have been busy with other tasks, and I recently started maintaining it again and fixing some bugs.

I saw that the most-supported driver for the Oculus sonar, [liboculus](https://github.com/apl-ocean-engineering/liboculus), has a discussion about the [M3000d](https://github.com/apl-ocean-engineering/liboculus/issues/22) and should support this sonar. I haven’t tested it, to be honest.  
This driver is specifically updated for the M3000d, as I didn’t notice before that the libocolus driver fully supported the M3000d…

The only problem I’m currently encountering is the pingRate reconfiguration, which is clamped to 9 Hz even if I request 15 or 40 Hz… I haven’t investigated it yet extensively.

Let me know if it is useful for the community!  
I’m also working on a lightweight, easy-to-modify C++ interface that substitutes the proprietary ViewPoint. This is to use the raw acoustic images in custom code (e.g., with OpenCV pipelines).

P.S. I also wrote very dummy [documentation](https://oculus-m3000d-ros2-cpp-driver.readthedocs.io/en/latest/index.html), as at that time it was my first time working with low-level sensor drivers and Ethernet sensors…

---

<div class="post-metadata">

**Author:** ![woensug-choi](https://sea2.discourse-cdn.com/flex022/user_avatar/discourse.openrobotics.org/woensug-choi/32/15758_2.png) [@woensug-choi](https://discourse.openrobotics.org/u/woensug-choi)\
**Post date:** [October 28, 2026, 1:34am UTC](https://discourse.openrobotics.org/t/ros2-driver-for-blueprint-subsea-oculus-m3000d/59261/2 "2026-10-28T01:34:30Z")

</div>

Thank you for sharing! I would love to dig in to it once I have my own M3000d 😃
